Guy makes home made stretcher

Hello, I don't really have a major phimosis problem, just sometimes foreskin can be a little tighter than I would like... 

So anyway, in years gone by I tried finger stretching and found it hurt my fingers more than anything and could only manage 20-30 minute stretch. Recently I made my own stretcher and it works perfect and can wear it for ages, just sharing for you guys. 

It's essentially just a mini metal spring clamp(the kind with rubber sleeves on the tips) like this that you can get from any hardware store. 


The handle end is the end that does the stretching on my device but I guess either way would work. I removed the rubber tips from the clamp end and drilled a hole right through. Then insert a threaded bolt, and use a combination of 3 nuts. 2 nuts hold one side of the clamp onto the bolt, the other wing nut on the left is what controls the stretch and speeds and closes the clamp. I have used 2 wing nuts and 1 normal nut but you only need 1 wing nut really. 

The two blobs of black stuff on the sides are simply silicone sealant and they just stop the foreskin sliding down the clamp. 

total cost about $4.  


Source: http://www.network54.com/Forum/244184/thread/1383786548/last-1383850156/My+homemade+stretcher+%28pics%29
November 2013